member of
- Fakulti Kejuruteraan Lecturer
Close
Abdullah, Mohamad Faizal
Positions
- Professor Madya, Fakulti Kejuruteraan , Universiti Pertahanan Nasional Malaysia
Affiliation
Publications
selected publications
-
academic article
- An Investigation of the Effect of Wide Range Gamma Radiation from Nanoindentation of the SAC305 Solder Alloy. Journal of Advanced Research in Micro and Nano Engineering. 17:18-27. 2024
- A Statistical Analysis for Optimisation of a Hybrid BBDB-PA in Mantanani Island, Sabah. Journal of Marine Science and Engineering. 11:386. 2023
- Determination of Dimple Core Design Configurations for Sandwich Panel Enhancement Using Fuzzy-Hybrid Decision Making Analysis. Materials. 16:935. 2023
- Entropy generation approach for evaluating energy dissipation and temperature rise to predict the fatigue life behaviour in magnesium alloy. Journal of Materials Research and Technology. 26:4387-4404. 2023
- Design selection for a hemispherical dimple core sandwich panel using hybrid multi-criteria decision-making methods. Nanotechnology Reviews. 11:2451-2468. 2022
- EDS analysis on effect of low dosage gamma radiation and micromechanical properties of SnAg3Cu0.5 solder. Journal of Materials Science: Materials in Electronics. 33:4225-4236. 2022
- Energy absorption capability and deformation of laminated panels for armoured vehicle materials. International Journal of Automotive and Mechanical Engineering. 13:3657-3668. 2022
- Fatigue damage assessment of metal sandwich panels under four-point bending cyclic loading conditions. International Journal of Fatigue. 164:107172. 2022
- Fatigue life of the magnesium alloy AZ31B under specific spectrum loading. Materials Testing. 58:200-205. 2022
- Geometrical effects of different core designs on metal sandwich panel under static and fatigue condition. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 44:111. 2022
- INFLUENCE OF GAMMA RADIATION ON EUTECTIC PHASE AREA AND HARDNESS PROPERTIES OF SAC305 SOLDER. Jurnal Teknologi. 84:113-118. 2022
- Improvement of high velocity impact performance of carbon nanotube and lead reinforced magnesium alloy. International Journal of Automotive and Mechanical Engineering. 13:3423-3433. 2022
- Mechanical properties and microstructures of steel panels for laminated composites in armoured vehicles. International Journal of Automotive and Mechanical Engineering. 13:3742-3753. 2022
- Multiple linear regression parameters for determining fatigue-based entropy characterisation of magnesium alloy. Frattura ed Integrità Strutturale. 16:289-303. 2022
- Simulation Study on Hypervelocity Penetration of Lab Scaled Shape Charge Mechanism. Journal of Engineering and Technological Sciences. 54:220613. 2022
- Simulation and Experimental of Crack Propagation in Automotive Engineering Component. Key Engineering Materials. 908:467-472. 2022
- The Synergistic Effects of Hybrid Micro and Nano Silica in Influencing the Mechanical Properties of Epoxy Composites—A New Model. Polymers. 14:3969. 2022
- A Study of Stress Behaviour and Energy Absorption for Sandwich Metal Panel Compared to Solid Material under Static Condition. Journal of Failure Analysis and Prevention. 21:2021-2028. 2021
- Computational analysis on the different core configurations for metal sandwich panel under high velocity impact. Soft Computing. 25:10561-10574. 2021
- Evaluating an adhesive effect on core surface configuration for sandwich panel with peel simulation approach. Journal of Mechanical Science and Technology. 35:2431-2439. 2021
- Review of current trends for metal-based sandwich panel: Failure mechanisms and their contribution factors. Engineering Failure Analysis. 123:105302. 2021
- Ballistic performance of the steel-aluminium metal laminate panel for armoured vehicle. Journal of Mechanical Engineering and Sciences. 14:6452-6460. 2020
- Energy Absorption at High Strain Rate of Magnesium Alloy AZ31B. International Journal of Integrated Engineering. 12. 2020
- Fatigue Crack Growth Behaviour of Sandwiched Metal Panel of Aluminium and Mild Steel under Constant Amplitude Loading. International Journal of Integrated Engineering. 12. 2020
- Point Absorber Method as Wave Energy Convertor Device for Power Generation: Effect of Buoy Arrangements. International Journal of Integrated Engineering. 12. 2020
- Ballistic impact properties of woven bamboo- woven E-glass- unsaturated polyester hybrid composites. Defence Technology. 15:282-294. 2019
- Numerical impact strain response of multi-layered steel–aluminium plate using signal processing. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 41:29. 2019
- Optimisation of the Hardness AZ31B Reinforced with Lead and Carbon Nanotubes using the Response Surface Method. IOP Conference Series: Materials Science and Engineering. 606:012001. 2019
- Ballistic Limit of Laminated Panels with Different Joining Materials Subjected to Steel-Hardened Core Projectile. International Journal of Integrated Engineering. 10. 2018
- Brazed Joint Interface Bonding Strength of AR500 Steel and AA7075 Aluminium Alloy. Metals. 8:668. 2018
- Experimental and Numerical Investigation on the Layering Configuration Effect to the Laminated Aluminium/Steel Panel Subjected to High Speed Impact Test. Metals. 8:732. 2018
- Improvement of energy absorption on magnesium alloy mixed carbon-nanotube and lead reinforcement materials in terms of high velocity impact. International Journal of Integrated Engineering. 10. 2018
- Methylene blue removal by using pectin-based hydrogels extracted from dragon fruit peel waste using gamma and microwave radiation polymerization techniques. Journal of Biomaterials Science, Polymer Edition. 29:1745-1763. 2018
- Ballistic Limit of High-Strength Steel and Al7075-T6 Multi-Layered Plates Under 7.62-mm Armour Piercing Projectile Impact. Latin American Journal of Solids and Structures. 13:1658-1676. 2016
- EFFECTS OF WETTING TIME ON PROPERTIES OF STEEL-ALUMINIUM BRAZED JOINT. Jurnal Teknologi. 78. 2016
- INVESTIGATION ON BRAZING INTERFACE BONDING CHARACTERISTIC OF AA7075 AND AA6061 ALUMINUM ALLOY WITH AR500 STEEL USING Al-Si-Zn FILLER METAL. Jurnal Teknologi. 78. 2016
- Microscale groove effect on shear strength of epoxy-bonded dissimilar metal plate. Journal of Adhesion Science and Technology. 30:2001-2012. 2016
- Analysis of Variable Strain Amplitude Response Caused by Impact Loading of Carbon Nanotube Reinforced Magnesium Alloy AZ31B. Procedia Engineering. 101:10-17. 2015
- Failure observation of the AZ31B magnesium alloy and the effect of lead addition content under ballistic impact. Advances in Mechanical Engineering. 7. 2015
- Corrosion Effect on Car Welded Jointed in Terms of Sea Environment Effect. Applied Mechanics and Materials. 165:78-82. 2012
- Verification of 14DOF Full Vehicle Model Based on Steering Wheel Input. Applied Mechanics and Materials. 165:109-113. 2012
- Durability Assessment of Quad Flat No-Lead Package Using Signal Analysis. Key Engineering Materials. 462-463:236-240. 2011
- FAILURE ANALYSIS OF A SEMICONDUCTOR PACKAGING LEADFRAME USING THE SIGNAL PROCESSING APPROACH. International Journal of Modern Physics B. 24:175-182. 2010
- Hardness Test on an Epoxy Mold Compounds of a Quad Flat No Lead Package Using the Depth Sensing Nanoindentation. Advanced Materials Research. 146-147:1000-1003. 2010
- Effect of Leadframe Oxidation on the Reliability of a Quad Flat No-Lead Package. Journal of Electronic Packaging. 131. 2009
- Thermal-Mechanical Analysis of a Different Leadframe Thickness of Semiconductor Package under the Reflow Process. American Journal of Applied Sciences. 6:616-625. 2009
- The Effect of Leadframe Oxidation of a Quad Flat No-Lead Semiconductor Package under Cyclic Loading. Journal of Applied Sciences. 8:1676-1683. 2008
-
chapter
- Characterization of Fatigue and Crack Growth on AZ31B Magnesium Alloy. Structural Integrity. 155-169. 2022
- Enhancement of Mechanical Properties for AZ31B Quenching in Nano Fluid. Structural Integrity. 45-55. 2022
- Fatigue Damage Simulation of a Metal Sandwich Panel Under Four-Point Bending Conditions. Structural Integrity. 29-37. 2022
- Multiple Linear Regression Parameters for Generating Fatigue-Based Entropy Characteristics of Magnesium Alloy. Structural Integrity. 303-312. 2022
-
conference paper
- Hypervelocity penetration against mechanical properties of target materials. AIP Conference Proceedings. 020033. 2018
- Fatigue Test Method for Observing the Delamination Effect in a QFN Package. 670-674. 2007
Contact
full name
- Mohamad Faizal Abdullah
primary email
- m.faizal@upnm.edu.my
webpage
Publications in VIVO
Co-author Network
Map of Science
- Contact Info
- Websites