member of
- Fakulti Kejuruteraan Lecturer
Close
Megat Ahmad, Megat Mohamad Hamdan
Positions
Affiliation
Publications
selected publications
-
academic article
- The product design preferences towards personality style. International Journal of Public Sector Performance Management. 14:447-464. 2024
- Numerical Simulation Study on Relationship between the Fracture Mechanisms and Residual Membrane Stresses of Metallic Material. Journal of Functional Biomaterials. 13:20. 2022
- Structural Characterization Analyses of Low Brass Filler Biomaterial for Hard Tissue Implanted Scaffold Applications. Materials. 15:1421. 2022
- Ballistic impact properties of woven bamboo- woven E-glass- unsaturated polyester hybrid composites. Defence Technology. 15:282-294. 2019
- Degradation behaviour of treated betelnut fibres reinforced polyester composites for tribological applications. World Review of Science, Technology and Sustainable Development. 14:180. 2018
- Fracture properties of hybrid woven bamboo/woven e-glass fiber composites. International Journal of Structural Integrity. 9:491-519. 2018
- Mechanical Properties of Layered Laminated Woven Bamboo Gigantochloa Scortechinii/Epoxy Composites. Journal of Polymers and the Environment. 26:1328-1342. 2018
- Surface Roughness Analysis of Stainless Steel Counterface (AISI-304) Subjected to Treated Betelnut Fiber–Reinforced Polyester (T-BFRP) Composites Aged in Different Solutions with Different Kinematic Viscosity. Materials Performance and Characterization. 7:281-319. 2018
- The Qualitative Measurement towards Emotional Feeling of Design for Product Development. IOP Conference Series: Materials Science and Engineering. 344:012024. 2018
- Development of estimated disturbance rejection feedback for an armoured vehicle using active front wheel steering. International Journal of Advanced Mechatronic Systems. 7:134. 2017
- Effects of layout design changes on frontal crash behaviour of small motorcycles. International Journal of Crashworthiness. 22:111-128. 2017
- Identification of an optimum control algorithm to reject unwanted yaw effect on wheeled armored vehicle due to the recoil force. Advances in Mechanical Engineering. 9. 2017
- Computational simulation of frontal impact of motorcycle telescopic fork. International Journal of Crashworthiness. 21:161-172. 2016
- DEVELOPMENT AND VERIFICATION OF A 9-DOF ARMORED VEHICLE MODEL IN THE LATERAL AND LONGITUDINAL DIRECTIONS. Jurnal Teknologi. 78. 2016
- Development of High Fidelity Finite Element Model of Motorcycle Telescopic Front Fork. International Journal of Simulation Modelling. 15:436-449. 2016
- Fatigue and Fracture Properties of Laminated Bamboo Strips from Gigantochloa scortechinii Polyester Composites. BioResources. 11. 2016
- Modeling, Validation, and Control of Electronically Actuated Pitman Arm Steering for Armored Vehicle. International Journal of Vehicular Technology. 2016:1-12. 2016
- A review on tribological performance of natural fibre polymeric composites. Tribology International. 83:77-104. 2015
- The effect of different systems of carrying backpacks on muscle activity. Journal of Human Sport and Exercise. 10. 2015
- Mechanical properties of laminated bamboo strips from Gigantochloa Scortechinii/polyester composites. Materials & Design. 57:551-559. 2014
- Bamboo, Thermoplastic, Thermosets, and their Composites: A Review. Applied Mechanics and Materials. 330:53-61. 2013
- Gravity Effects of Curing Angle on Laminated Composite Structures: A Review on Novel Study. Advances in Materials Science and Engineering. 2013:1-10. 2013
- Tensile Properties of Angle Cured Laminated Composites Structures under Gravity Effects. Applied Mechanics and Materials. 465-466:101-105. 2013
- Modeling the technology transfer process in the petroleum industry: Evidence from Libya. Mathematical and Computer Modelling. 55:451-470. 2012
- A tabu search approach for mixed-model parallel assembly line balancing problem (type II). International Journal of Industrial and Systems Engineering. 8:407. 2011
- Differential Scanning Calorimetry (<i>DSC</i>) Analysis of Abaca Fibre (<i>Musa Textile Nee</i>) Reinforced High Impact Polystyrene (<i>HIPS</i>) Composites. Advanced Materials Research. 295-297:929-933. 2011
- Investigation of Hardness of Short Abaca (<i>Musa Textile Nee</i>) Fibre-Reinforced High Impact Polystyrene (HIPS) Composites by Response Surface Methodology. Key Engineering Materials. 471-472:821-826. 2011
- Optimization of the Mechanical Properties of Abaca Fibre-Reinforced High Impact Polystyrene (HIPS) Composites Using Box-Behnken Design of Experiments. Polymers and Polymer Composites. 19:697-710. 2011
- Effective Factors on Advanced Manufacturing Technology Implementation Performance: A Review. Journal of Applied Sciences. 10:1229-1242. 2010
- Pre-Treatment by Water Retting to Improve the Interfacial Bonding Strength of Sugar Palm Fibre Reinforced Epoxy Composite. Polymers from Renewable Resources. 1:35-45. 2010
- The Effects of Weathering on Mechanical Properties of Kenaf Unsaturated Polyester Composites (KFUPC). Polymers and Polymer Composites. 18:337-343. 2010
- Development of a new approach for deterministic supply chain network design. European Journal of Operational Research. 198:121-128. 2009
- Optimal Design for a Thermosyphon Solar Water Heater Convenient for Malaysia. Multidiscipline Modeling in Materials and Structures. 5:247-250. 2009
- Review of kenaf fiber reinforced polymer composites. Polimery. 54:777-780. 2009
- The Influence of Alkaline Surface Fibre Treatment on the Impact Properties of Sugar Palm Fibre-Reinforced Epoxy Composites. Polymer-Plastics Technology and Engineering. 48:379-383. 2009
- The roles of communication process for an effective lean manufacturing implementation. Journal of Industrial Engineering and Management. 2. 2009
- Theoretical stress and strain distribution across thick - walled filament wound composite. Polimery. 54:559-563. 2009
- Unsteady-state modelling for a passive liquid-feed DMFC. International Journal of Hydrogen Energy. 34:5759-5769. 2009
- An experimental study for optimization of electrical discharge turning (EDT) process. Journal of Materials Processing Technology. 204:350-356. 2008
- Internal Pressure Carrying Capacity for Different Loading Modes of Filament-Wound Pipes from Glass Fiber-reinforced Epoxy Composites. Polymer-Plastics Technology and Engineering. 47:802-808. 2008
- Moisture absorption behavior of sugar palm fiber reinforced epoxy composites. Materials & Design. 29:1666-1670. 2008
- The Effect of Environmental Treatments on Fiber Surface Properties and Tensile Strength of Sugar Palm Fiber-Reinforced Epoxy Composites. Polymer-Plastics Technology and Engineering. 47:606-612. 2008
- The effect of alkaline treatment on tensile properties of sugar palm fibre reinforced epoxy composites. Materials & Design. 29:1285-1290. 2008
- Design and fabrication of low cost filament winding machine. Materials & Design. 28:234-239. 2007
- Effects of Winding Angles on the Strength of Filament Wound Composite Tubes Subjected to Different Loading Modes. Polymers and Polymer Composites. 15:199-206. 2007
- Study of Interfacial Adhesion of Tensile Specimens of <I>Arenga Pinnata</I> Fiber Reinforced Composites. Multidiscipline Modeling in Materials and Structures. 3:213-224. 2007
- Application of Gas-Kinetic BGK Scheme for Solving 2-D Compressible Inviscid Flow around Linear Turbine Cascade. International Journal for Computational Methods in Engineering Science and Mechanics. 7:403-410. 2006
- Empirical model for impact response of motorcycle front spoked wheel-tyre assembly. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. 220:1547-1563. 2006
- Experimental study on energy absorption characteristics of motorcycle front wheel—tyre assembly in frontal impact. International Journal of Crashworthiness. 11:131-142. 2006
- Mechanical properties of pineapple leaf fibre reinforced polypropylene composites. Materials & Design. 27:391-396. 2006
- Numerical analysis of heat transfer in cooling of fish packages. International Communications in Heat and Mass Transfer. 33:889-897. 2006
- Solution of Navier‐Stokes equations by fourth‐order compact schemes and AUSM flux splitting. International Journal of Numerical Methods for Heat & Fluid Flow. 16:107-120. 2006
- The Simulation Study of the Effect of Single and Double Gated Molds on Pressure and Temperature in Injection Molding of Polymeric Composite Clutch Pedals. Multidiscipline Modeling in Materials and Structures. 2:355-362. 2006
- A study of the comparison of `V' and `X' ribbing in a composite pedal using mold flow analysis software. Materials & Design. 26:157-166. 2005
- Cervical spine injuries sustained by motorcyclists in road crashes in Malaysia. International Journal of Crashworthiness. 10:295-303. 2005
- Grain refinement of LM6 Al–Si alloy sand castings to enhance mechanical properties. Journal of Materials Processing Technology. 162-163:435-441. 2005
- Mechanical and Electrical Properties of Coconut Coir Fiber-Reinforced Polypropylene Composites. Polymer-Plastics Technology and Engineering. 44:619-632. 2005
- Proposing a non‐traditional ordering methodology in achieving optimal flexibility with minimal inventory risk. Asia Pacific Journal of Marketing and Logistics. 17:31-43. 2005
- An AUSM‐based high‐order compact method for solving Navier‐Stokes equations. Aircraft Engineering and Aerospace Technology. 76:299-304. 2004
- Development of machine learning strategy for acquiring on-line machining skills during turning process. Journal of Materials Processing Technology. 155-156:2087-2092. 2004
- Implicit Gas-Kinetic Bhatnagar-Gross-Krook Scheme for Compressible Flows. AIAA Journal. 42:1293-1301. 2004
- On the energy absorption capability of axially crushed composite elliptical cones. Composite Structures. 66:495-501. 2004
- Development of a CAD/CAM system for the closed-die forging process. Journal of Materials Processing Technology. 138:436-442. 2003
- Increasing competitiveness through advanced manufacturing technologies. International Journal of Manufacturing Technology and Management. 5:371. 2003
- Motorcycle helmet. Journal of Materials Processing Technology. 123:422-431. 2002
- Elastohydrodynamic lubrication study of hard rolling contact using boundary element method. Industrial Lubrication and Tribology. 53:148-171. 2001
- Finite element and experimental analysis for the effect of elliptical chord shape on tubular T-joint strength. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 215:123-131. 2001
- Numerical and experimental investigation into porous squeeze films. Tribology International. 31:189-199. 1998
-
chapter
- A Comparison Analysis on Mechanical Properties Between Laminated Woven Bamboo and Epoxy Composite Versus Laminated Strip Bamboo and Polyester Composite. Advanced Structured Materials. 9-18. 2023
- Quasi-static Axial Crushing of E-Glass Fiber Reinforced Epoxy Composite by Different Number of Plies. Lecture Notes in Mechanical Engineering. 173-178. 2022
- On the improvement of tribological performance using treated betelnut fiber reinforced polyester (T-BFRP) and Teflon composite for automotive applications. Biocomposite and Synthetic Composites for Automotive Applications. 107-146. 2021
-
conference paper
- The Mechanical Designing Process of Proposed Ventilation System For Home Environments. 70-74. 2023
- Development and mechanical characterization of green bamboo composites. AIP Conference Proceedings. 020012. 2018
- Development of firing on board system of an armored vehicle using Active Front Wheel Steering system. 1709-1713. 2015
Contact
full name
- Megat Mohamad Hamdan Megat Ahmad
primary email
- megat@upnm.edu.my
webpage
Publications in VIVO
Co-author Network
Map of Science
- Contact Info
- Websites