Ku Ahmad, Ku Zarina

Ku Ahmad, Ku Zarina

Prof. Madya Dr.

Positions

Professor Madya, Fakulti Kejuruteraan , Universiti Pertahanan Nasional Malaysia

member of

Fakulti Kejuruteraan Lecturer

selected publications

academic article
- CRUMPLE ZONE MODELLING OF PASSENGER VEHICLE USING MULTIPLE KELVIN MODEL AND OPTIMIZED WITH PARTICLE SWARM OPTIMIZATION. Jurnal Teknologi. 87:117-127. 2024
- Enhanced mechanical properties of multi-scaled carbon reinforcements in ternary epoxy composites materials. E3S Web of Conferences. 477:00041. 2024
- Parameter optimization of anisotropic polarization in magnetorheological elastomers for enhanced impact absorption capability using the Taguchi method. Journal of the Mechanical Behavior of Materials. 33. 2024
- Development of Coconut Oil/Capric Acid Eutectic Phase Change Material with Graphene as Latent Thermal Energy Storage. International Journal of Automotive and Mechanical Engineering. 20:10247-10257. 2023
- Micromechanical response of SAC305 solder alloy under gamma radiation via nanoindentation approach. Soldering & Surface Mount Technology. 35:51-58. 2023
- Physicothermal and Topography Analysis of Polyurethane Modified Bitumen with Rediset for WMA Application. Journal of Engineering and Technological Sciences. 55:30-39. 2023
- Superhydrophobic Modification of Sansevieria trifasciata Natural Fibres: A Promising Reinforcement for Wood Plastic Composites. Polymers. 15:594. 2023
- THE EFFECTS OF ADDITIVE ON THE IMPACT ABSORPTION CAPABILITY OF MAGNETORHEOLOGICAL ELASTOMER. Jurnal Teknologi. 85:17-25. 2023
- EDS analysis on effect of low dosage gamma radiation and micromechanical properties of SnAg3Cu0.5 solder. Journal of Materials Science: Materials in Electronics. 33:4225-4236. 2022
- INFLUENCE OF GAMMA RADIATION ON EUTECTIC PHASE AREA AND HARDNESS PROPERTIES OF SAC305 SOLDER. Jurnal Teknologi. 84:113-118. 2022
- Impact Behaviour of Laminated Bamboo, E-Glass and Hybrid Bamboo/E-Glass Fibre Composites. International Journal of Integrated Engineering. 14. 2022
- RSM Modeling and Validation of Glass Assisted Laser Micro Drilling of Silicon Wafer. Key Engineering Materials. 908:517-525. 2022
- RSM Modelling for Laser Cutting of Shore Wood to Replace Traditional Manufacturing Method. Key Engineering Materials. 908:526-534. 2022
- The Synergistic Effects of Hybrid Micro and Nano Silica in Influencing the Mechanical Properties of Epoxy Composites—A New Model. Polymers. 14:3969. 2022
- Thermal properties evaluation of paraffin wax enhanced with carbon nanotubes as latent heat thermal energy storage. Journal of Energy Storage. 52:105027. 2022
- Influences of low dose gamma radiation on hardness and microstructure properties of green solder joint. Journal of Physics: Conference Series. 1816:012118. 2021
- Energy Absorption at High Strain Rate of Magnesium Alloy AZ31B. International Journal of Integrated Engineering. 12. 2020
- Mechanical Properties of Epoxy Composites Containing Carbon Black and Graphene. International Journal of Integrated Engineering. 12. 2020
- An experimental approach to investigate thermal performance of paraffin wax and 1-hexadecanol based heat sinks for cooling of electronic system. International Communications in Heat and Mass Transfer. 109:104365. 2019
- Characterization of fuel briquettes from banana tree waste. Materials Today: Proceedings. 5:21744-21752. 2018
- Thermal conductivity of an ethylene glycol/water-based nanofluid with copper-titanium dioxide nanoparticles: An experimental approach. International Communications in Heat and Mass Transfer. 90:23-28. 2018
- Investigation on Stability and Optical Properties of Titanium Dioxide and Aluminum Oxide Water-Based Nanofluids. International Journal of Thermophysics. 38:77. 2017
- Synthesis and thermal conductivity characteristic of hybrid nanofluids – A review. Renewable and Sustainable Energy Reviews. 75:868-878. 2017
- The field-dependent complex modulus of magnetorheological elastomers consisting of sucrose acetate isobutyrate ester. Journal of Intelligent Material Systems and Structures. 28:1993-2004. 2017
- An overview on current application of nanofluids in solar thermal collector and its challenges. Renewable and Sustainable Energy Reviews. 53:1092-1105. 2016
- Characterization of Raw and Thermally Treated Alum Sludge. Key Engineering Materials. 701:138-142. 2016
- Effect of sucrose acetate isobutyrate ester on the epoxidised natural rubber based magnetorheological elastomers. Journal of Physics: Conference Series. 776:012034. 2016
- Thermal Conductivity Enhancement of Graphene Epoxy Nanocomposite. Key Engineering Materials. 701:13-17. 2016
- Application of Taguchi's Approach in the Optimization of Tensile Properties of Epoxy/Nanoclay/MWCNT Nanocomposites. Advanced Materials Research. 576:256-259. 2012
- Optimization of Tensile Properties of Epoxy/Nanoclay/MWNT Nanocomposites by Taguchi Method. Advanced Materials Research. 428:3-6. 2012
- Thermal Conductivity, Thermal Diffusivity and Specific Heat of TPNR Hybrid Nanocomposites at Different Temperatures. Advanced Materials Research. 576:296-299. 2012
- Thermoplastic natural rubber composites reinforced with OMMT, MWNTs, and hybrid OMMT–MWNTs. Journal of Reinforced Plastics and Composites. 30:1745-1752. 2011
chapter
- Enhancement of Mechanical Properties for AZ31B Quenching in Nano Fluid. Structural Integrity. 45-55. 2022
conference paper
- Optimizing friction stir weld parameters of aluminum and copper using conventional milling machine. AIP Conference Proceedings. 020013. 2018
- Investigation of microstructure and mechanical properties of PLLA/HA system. AIP Conference Proceedings. 100013. 2017

full name

Ku Zarina Ku Ahmad

primary email

kuzarina@upnm.edu.my

webpage

Publications in VIVO

Co-author Network

Contact Info

kuzarina@upnm.edu.my

Websites